flexible-shipping-ups domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home2/pcctile/public_html/wp-includes/functions.php on line 6114wordpress-seo domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home2/pcctile/public_html/wp-includes/functions.php on line 6114The post Proflex DPU Cement appeared first on PCC Tile Professional Ceramics Co..
]]>A self leveling compound of Calcium–Aluminate cement, sand, and proprietary chemicals used to smooth and finish rough interior concrete or wood floors where a fast set is desired within hours. May be applied up to 11⁄2” in a single application. Mixes with water, initial set 3-5 hours, self–healing during flowing and working time, light weight and superior strength.
Advantages
| Pour Depth | 1/4″ | 1/2″ | 1″ | 1 1/2″ |
| Yields (Sq.ft.) | 24 | 12 | 6 | 4 |
Coverage will vary based on pour thickness, values are per 50 lb. bag. For primer, coverage will vary based on the substrate.
Priming
All surfaces must be primed with PROFLEX DPU Primer prior to installing. The primer must be dry to the touch before applying. Allow the primer to dry for a minimum of 3 hours and a maximum of 48 hours. The primer dilution or modification will depend on the nature of the substrate. Substrate primer dilution with water as follows:
The post Proflex DPU Cement appeared first on PCC Tile Professional Ceramics Co..
]]>The post Proflex DPU Primer appeared first on PCC Tile Professional Ceramics Co..
]]>Deep Pour Underlayment Substrate Primer
DPU Primer is a necessary companion product to PROFLEX® DPU. All surfaces must be primed with PROFLEX® DPU Primer prior to installing PROFLEX® DPU. The primer must be dry to the touch before applying PROFLEX® DPU. Allow the primer to dry for a minimum of 3 hours and a maximum of 48 hours. The primer dilution or modification will depend on the nature of the substrate.
Approximately 300 – 400 sq. ft. /gal. **Please refer to the DPU Product Data Sheet at proflex.us for specific dilution ratios and coverages.
The post Proflex DPU Primer appeared first on PCC Tile Professional Ceramics Co..
]]>The post Proflex Pro-Stick 50 appeared first on PCC Tile Professional Ceramics Co..
]]>PROFLEX® PROFLEX PRO-STICK 50 is a (ANSI 118.11) latex modified, medium bed mortar composed of sand, cement, and resins used to adhere a variety of tile surfaces, natural stone, marble, and granite, to approved substrates. Specially formulated to hold large format tiles and stone surfaces in place on vertical surfaces, and reduces unevenness caused by setting tile on horizontal surfaces. PRO-STICK 50 is applied in thickness from 3/16 to 3/4 inches to adhere marble, granite, and tile, to plaster, drywall, concrete, and masonry surfaces. Designed to set tiles vertically of up to 5 lbs. per sq. ft. (Larger sized units must be field tested to determine suitability).
Advantages
Uses
For installation of: Ceramic tile, Pavers, Quarry tile, Porcelain tile, Clay bodied tile, High bottom lugged tile, Marble, Granite, Mosaic, large format tiles, Vertical tile installations up to 5 lbs per sq. ft
For installation over: Tile backerboard, Plumb and true masonry, Properly cured and finished concrete, Gypsum plaster, gypsum block or gypsum board (dry areas – walls only), Cured portland cement mortar, exterior grade plywood, plastic laminates, masonry surfaces.
| Shear Strength | 7 days (psi) | 28 days (psi) |
| Quarry Tile | 250-300 | 550-600 |
| Mosaic Tile | 250-300 | 350-400 |
| Glazed Wall Tile | 400-450 | 450-500 |
| Compressive Strength | 4000-4500 | 6000-6500 |
| Adjustability | 15 minutes | |
| Open Time | 60 minutes | |
| Final Set | 6-8 hours |
3/4” x 9/16” x 3/8” U Notch trowel 34 – 38 sq. ft., 1/2” x 1/2” x 1/2” Square Notch trowel 40 – 50 sq. ft. , 1/4” x 3/8” x 1/4” Square Notch trowel 70 – 80 sq. ft.
Backer Boards, Plumb and True Masonry, Cured and Finished Concrete, Gypsum Wallboard (dry areas only), Cured Portland Cement, Exterior Grade Plywood, Plastic Laminate, Masonry Surfaces, Proflex Membranes and Underlayments (see warranties)
The post Proflex Pro-Stick 50 appeared first on PCC Tile Professional Ceramics Co..
]]>The post Proflex Pro-Stick 42XLT appeared first on PCC Tile Professional Ceramics Co..
]]>PROFLEX® PRO-STICK 42 XLT is a one step polymer modified portland cement setting adhesive for installing extra large format porcelain, ceramic tile and natural stone on both walls and floors. PRO-STICK 42 XLT with its unique properties can be used as a thin or medium bed setting adhesive for installing large format, ceramic, porcelain and irregular thickness stone without the need of back buttering the tile.
Advantages
Typical Use
PRO-STICK 42 XLT is ideal for use in installations of extra large oversize ceramic tile and natural stone for both walls and floors in both interior and exterior applications. It is recommended for use for absorptive, semi vitreous, vitreous tile and impervious ceramic tile such as porcelain tile and natural stone over properly prepared masonry, concrete, cement backer board, membranes and existing ceramic tile. For interior dry areas, it is suitable for properly prepared gypsum board and exterior grade plywood substrates. PRO-STICK 42 XLT is suitable for both residential and commercial construction. It is recommended for use in the thin set installation method for vitreous tiles like porcelain over low or non-absorptive subfloors, and membranes.
| Properties | ||
| ANSI 118.4 | ANSI Requirements | PS 24 XLT Results |
| Glazed Wall Tile, 48 hour shear | >100 psi | >260 psi |
| Impervious Mosaic, 28 day shear | >200 psi | >480 psi |
| LEED v3 NC VOC | EQ Credit 4.1 | PS 42 XLT Results |
| VOC | <65 g/l | 0 g/l |
1/4” x 1/4” Square, 65 – 75 sq. ft. Ceramics, 1/2” x 1/2” Square, 55 – 65 sq. ft. Quarry Tile, Rough Stone, 1/4” x 3/8” Square, 35 – 45 sq. ft. Large Tile, Marble, Stone
Brick masonry, Cement backer board(1), Cement mortar beds, Cement plaster, Cement terrazzo, Ceramic tile and stone, Concrete, Concrete masonry, Cutback adhesive(2), PROFLEX® Membranes, Existing tile, Post tension, Vinyl composition flooring(2)
The post Proflex Pro-Stick 42XLT appeared first on PCC Tile Professional Ceramics Co..
]]>The post Proflex Pro-Stick 42 appeared first on PCC Tile Professional Ceramics Co..
]]>PROFLEX® PRO-STICK 42 thin set mortar has superior performance and workability characteristics not found in regular thin set mortars, along with an extended open time. When mixed, it produces a creamy, easy to spread mortar specially developed for the professional tile setter. For commercial and residential use.
Advantages
Uses
For installation of: Ceramic tile, Pavers, Quarry tile, Porcelain tile, Clay bodied tile, High bottom lugged tile, Marble, Granite, Mosaic, large format tiles, Vertical tile installations up to 5 lbs per sq.ft For installation over: Tile backerboard, Plumb and true masonry, Properly cured and finished concrete, Gypsum plaster, gypsum block or gypsum board (dry areas – walls only,) Cured portland cement mortar, exterior grade plywood, plastic laminates, masonry surfaces.
| Shear Strength | 7 days (psi) | 28 days (psi) |
| Quarry Tile | 250-300 | 450-500 |
| Mosaic Tile | 250-300 | 300-350 |
| Glazed Wall Tile | 250-300 | 400-450 |
| Quarry Tile to Plywood | 175-200 | 200-250 |
| Compressive Strength | 1500-2000 | 3500-4000 |
| Adjustability | 15-20 minutes | |
| Open Time | 50-70 minutes | |
| Final Set | 6-8 hours |
1/2” x 1/2” x 1/2” square notch trowel 40-50 sq. ft. , 1/4” x 3/8” x 1/4” square notch trowel 70-80 sq. ft.
Backer Boards, Plumb and True Masonry, Cured and Finished Concrete, Gypsum Wallboard (dry areas only), Cured Portland Cement, Exterior Grade Plywood, Plastic Laminate, Masonry Surfaces, Proflex Membranes and Underlayments (see warranties)
The post Proflex Pro-Stick 42 appeared first on PCC Tile Professional Ceramics Co..
]]>The post Proflex Pro-Stick 42L appeared first on PCC Tile Professional Ceramics Co..
]]>PROFLEX® PS 42L is a polymer modified dry set mortar composed of lightweight aggregates, sand, cement, dry resins and other proprietary chemicals used to adhere virtually all types of tile, especially large tile units, marble, and granite to acceptable surfaces. Due to its light-weight and flexible properties, PS 42L installations provide higher resistance to cracking than normal mortars. PS 42L is especially formulated to hold large units in place on vertical surfaces. PS 42L also reduces unevenness caused by setting of the tile when used on horizontal surfaces.
Advantages
Uses
For installation of: Ceramic tile, Pavers, Quarry tile, Porcelain tile, Clay bodied tile, High bottom lugged tile, Marble, Granite, Mosaic, large format tiles, Vertical tile installations up to 7 lbs. per sq. ft.
For installation over: Tile backer board, Plumb and true masonry, Properly cured and finished concrete, Gypsum plaster, gypsum block or gypsum board (dry areas – walls only,) Cured portland cement mortar, exterior grade plywood, plastic laminates, masonry surfaces.
| Shear Strength | 7 days (psi) | 28 days (psi) |
| Quarry Tile | 250-300 | 500-525 |
| Mosaic Tile | 250-300 | 400-450 |
| Glazed Wall Tile | 350-400 | 450-500 |
| Quarry Tile to Plywood | 175-200 | 200-250 |
| Compressive Strength | 4000-4500 | 6000-6500 |
| Adjustability | 15 minutes | |
| Open Time | 60 minutes | |
| Final Set | 6-8 hours |
1/2” x 1/2” x 1/2” square notch trowel 40-50 sq. ft., 1/4” x 3/8” x 1/4” square notch trowel 70-80 sq. ft.
Backer Boards, Plumb and True Masonry, Cured and Finished Concrete, Gypsum Wallboard (dry areas only), Cured Portland Cement, Exterior Grade Plywood, Plastic Laminate, Masonry Surfaces, Proflex Membranes and Underlayments (see warranties)
The post Proflex Pro-Stick 42L appeared first on PCC Tile Professional Ceramics Co..
]]>